⛓ Classic Full Body Leather Cock Ring Harness

Heavy leather. Stainless steel hardware. Fully adjustable and remarkably versatile.

One of the designs that reaches back to the early days of Hard Man Outfitters, our Classic Full Body Leather Cock Ring Harness combines substantial black leather with polished stainless steel rings, snaps, and hardware.

Built as a modular harness rather than a fixed arrangement, it can be adjusted, stripped down, reconfigured, and fitted with different HMO wire rings to change both the look and the weight.

⭐ An HMO Classic

This harness has been part of the Hard Man Outfitters story for many years. Its combination of leather construction, removable sections, and interchangeable stainless steel rings makes it one of the most distinctive pieces in our original gear collection.

⚙️ Why This Design Works

• Full-body configuration — shoulder, chest, waist, and center straps create a strong architectural harness profile.
• Modular construction — removable sections allow several different ways to wear it.
• Adjustable fit — rear buckles, snaps, and an elastic center-back section with adjusting slider accommodate a broad range of body sizes.
• Adjustable front positioning — the vertical front straps can be fine-tuned to position the navel and cock rings to your anatomy.
• Interchangeable steel rings — the front rings can be replaced with different HMO wire-ring sizes and weights.
• Heavy garment leather — approximately 1″ wide and 1/8″ thick for a substantial but wearable build.

🔄 Wear It More Than One Way

The harness can be configured several ways:

• Full harness — torso, waist, center strap, and cock ring.
• Torso and waist harness — remove the front cock-ring strap and disconnect it from the rear center ring.
• Torso harness only — remove the lower center section and waist straps as well.
• Custom arrangements — experiment with alternate combinations using the removable snaps and rings.

Only the single rear anchor ring is permanently fixed; the remaining layout is built around it.

📏 Fit & Specifications

• Material: Genuine black garment leather
• Leather straps: Approx. 1″ wide × 1/8″ thick
• Hardware: Polished stainless steel rings, snaps, and buckles
• Fit: One size, highly adjustable
• Maximum waist adjustment: Approx. 40″
• Chest ring: 4mm stainless steel wire
• Navel ring: 4mm stainless steel wire
• Standard cock ring: 6mm wire × 50mm ID
• Compatible ring thickness: Up to approximately 8mm wire

The harness shown in some photographs is fitted with our heavier 8mm wire rings.

🔩 Make It Your Own

The three front stainless steel rings can be changed to alter the fit, appearance, and overall weight of the harness.

For a more customized cock-ring fit, explore our
Classic Stainless Steel Wire Cock Rings.

Heavier rings can add a noticeably different feel and significantly increase the total weight of the harness.

🧠 The Experience

Leather. Steel. Presence.

This is not a minimal harness. The wide leather straps, polished hardware, and adjustable stainless steel rings create a substantial full-body piece with unmistakable HMO character.

Wear it complete, pare it down, or change the rings and make the configuration your own.